![]() ![]() Linseed oil must be applied to unvarnished wood, otherwise the oil will fail to deeply penetrate the wood surface. Completely sanding your wood surface is not necessary, which saves you time and money. Maintenance is quite easy and inexpensive-only a small amount of oil is necessary to treat dull or damaged areas. Exterior wood surfaces exposed to weathering conditions generally need maintenance every two years. The oil must be applied on virgin wood, but the process can be repeated over time to maintain adequate protection. It’s extremely easy to use and dries rapidly. This oil is used to coat wood and protect it from the effects of deteriorating agents. Linseed oil is the best option to protect natural wood that is neither varnished nor previously stripped of other coatings. Enhances the natural grain and patina of wood.Seals the wood grain, protecting it against the harmful effects of humidity and dirt while allowing the wood to breathe.There is no need for stains, varnish, lacquers, or any other product-linseed oil does it all! LINSEED OIL PROPERTIES ![]() Wood oils today are all-in-one products that seal and stain both indoor and outdoor wood surfaces all at once, leaving a quality finish and long-lasting protection. Applying the oil prior to varnishing a surface is not recommended as it might prevent the varnish from adhering smoothly. Linseed oil is used as a base in some ecological and craft paints because of its characteristics. One of its most enduring uses, however, is as a protective finish for wood surfaces. ![]() It is used in food preparation and as a dietary supplement due to its many health benefits. Linseed oil has numerous well-documented qualities and is extracted from the seeds of the flaxseed plant. Linseed oil works well on wood with a natural or rustic finish and on exotic woods, and it holds up on poorly maintained wood and wood that is exposed to high levels of friction. It has waterproofing capacity, but it does not protect from dirt or intense sunlight (though some manufacturers add UV protection to their formulations). Linseed oil is useful for protecting wood surfaces, but it is not a paint. In fact, in terms of quality and cost, it is probably the most attractive alternative wood oil product on the market. It’s an ecological and natural alternative to varnish on both indoor and outdoor surfaces owing to its protective properties. Environmentally friendly, breathable and open pored.Linseed oil can be applied to wood without the need for complex surface prep. The areas that are protected from the weather will also match the overall appearance in the long term as any unwanted colour differences in the typical areas, such as roof overhangs and around windows, are avoided. This allows the wood façade to retain a continuously natural patina. If the surface weathers over time, the factory greying will be replaced by natural greying. Once the façade is mounted, a greyed front will be shown from the very first day. In a special finishing process, paints with aluminium particles are used in production to create a natural grey, silky appearance, which anticipates the natural patina of openly weathered façade surfaces. To give the wood an even overall impression and stop it from being affected by the weather conditions, we offer pre-greying in the factory with häussermann WoodCare® Natural Patina. Wood façades age after just a few months, depending on the intensity of the UV radiation and rain. Pre-greyed wood façade – häussermann WoodCare® Natural Patina ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |